PERIMETER TECHNOLOGY Products

 

I.  ACTIVE INFRARED Barriers

Active infrared barriers are composed of :

– TRANSMITTER CELLS that emit beams of invisible infrared light.

– RECEIVER CELLS that detect the beams and analyze weather they are correctly received.

By combining these two cell types, active infrared barriers form an immaterial wall. When one or more beams are interrupted, the system triggers an alarm. The columns are positioned facing one another and are installed along the perimeter of the site to be protected. To meet all of your specialized needs, we have developed four housings that can be used with all of our products.

A P I R I S

The triple-technology barrier APIRIS is the only one that combines a multiplexed infrared beam barrier, a high-frequency barrier and a high-frequency sensor with Doppler effect. The alarm activation principle is based on simultaneous intrusion detection by at least two of the technologies, including infrared. This system makes detection reliable and limits unwanted alarms.

Moreover, APIRIS integrates the zoning function used to optimise the use of video domes. A maximum ofthree virtual intrusion zones can be defined and configured per barrier.

ACCR automates these processes efficiently: all you need is a camera, set in position to view container codes so we can receive the perfect input. The recognition happens in a blink of an eye and the OCR data – including serial number with check digit, owner, country code, size, type and equipment category – can be saved to a database or transferred further to any IT system.

APIRIS Technology

High Technology  on COMBINES VOLUMETRIC DETECTION WITH AN INFRARED BARRIER

C O L I R I S

The working of COLIRIS II is based on the 100Hz D.I.S technology, i.e. a single column integrating the dual transmitter/receiver function. A COLIRIS II barrier becomes a real infrared beam wall, reinforced by the transmitter function on each column.

The infrared activation mode of COLIRIS II is based on the cutting of two adjacent beams, avoiding the dead zone of traditional barriers. The lower beam can be set to time-delayed mono-detection mode in order to detect possible intrusions by crawling (advanced configuration by computer, not available in the 200 m version).

COLIRIS II has contact outputs on each column, thus limiting the wiring constraints as best as possible.

COLIRIS II is available in three heights: 1.10m, 1.50m and 1.90m; it offers up to sixteen beams per barrier (eight per column).

COLIRIS Technology

EASY INSTALLATION,  RELIABILITY, INNOVATION

M A X I R I S

The MAXIRIS infrared barriers offer the highest level of performance of SORHEA products. In fact, for long perimeters (above 1 km), the MAXIRIS columns can be directly connected to a TCP/IP network or in RS485 bus via the MAXIBUS UNIVERSAL Hub.

Thanks to the ZONING function, up to three virtual detection zones can be created (configurable length) per barrier, optimising the video system (alarm information per zone) and, thus, reinforcing site reliability while guaranteeing a very high security level.

A multi-lingual HTML server, integrated into each column, can be used to carry out all the system configuration and maintenance operations

MAXIRIS Technology

ADVENTAGES :

MODULARITTY, INNOVATION, &  RELIABILITY

M I N I R I S

MINIRIS II infrared barriers are specially designed for building façades and are, therefore, suitable for industrial or residential sites.

With a maximum of 12 beams, MINIRIS II barriers offer a high level of security, made reliable by optical synchronisation and the differentiation of barriers through selectable channels.

With an aluminium structure, little space requirement and hinge brackets which can be rotated 90°, MINIRIS II adapts perfectly to any configuration of the site to be protected.

 

MINIRIS Technology

RANGE : 50 m outside

RELIABILITY : 4 selectable channels, optical synchronisation

SUITABLE DESIGN : Reinforced aluminium, ivory-white

U N I R I S / B I R I S

The AGC guarantees detection reliability 4 selectable channels prevent interferences between barriers, to gurantee an efficient operation of the installation. 

The UNIRIS II / BIRIS II barriers propose ranges of 50, 100 or 200 m. As the modules can be stacked on top of eachother the UNIRIS II / BIRIS II can be used as a modular solution to best adapt to the site requirements. During installation, the integrated alignment tools (audible and visual leds) make the products easy to use. The alignment feedback function is also available on BIRIS II 200m.

Thanks to a reliable, tried-and-tested technology integrated into some small products, UNIRIS II / BIRIS II is a solution that meets the needs of the perimeter detection market.

UNIRIS/BIRIS Technology

RANGE : 50 m to 200 m outside

RELIABLILITY : selectable channels, automatic gain control

USER-FRIENDLY : quick and easy installation, elegant design

S O L A R I S

The SOLARIS independent columns form a real immaterial wall of detection. Powered by a solar panel and an integrated battery, no civil engineering is necessary during the installation. A radio mesh is then created by all the SOLARIS columns to transmit alarm information reliably and efficiently.
Each SOLARIS column integrates a very powerful radio transmitter/receiver with low power consumption.

When the infrared barrier detects an intrusion, the alarm information is received by all the nearby infrared columns which in turn retransmit it automatically. The alarm message is thus relayed up to a radio reception coordinator connected to the MAXIBUS UNIVERSAL hub. The alarm centre is then alerted to the intrusion.

 

SOLARIS Technology

High performanceInfrared barrier

EASY INSTALLATION , RELIABILITY , INNOVATION

II. SHOCK DETECTION Cables

Shock detection cables consist of:

– SENSORS installed on Fencing Panels

– CONNECTED to a CONTROL UNIT.

Attempts to climb over or cut the lines are detected by the sensors and transmitted to the control units which then trigger an alarm. The shock detection cables create an intrusion detection system that utilises the existing fencing at the site to be secured.

G-FENCE 600

G- FENCE 600 and 600Z are shock detection systems for fences, designed for perimeters of 600 m maximum. G-FENCE 600 and 600Z are made up of detector cables connected to a control unit; they detects vibrations caused by an intrusion made by climbing, cutting or pulling out the fence.

During an intrusion these vibrations are detected by the accelerometer sensor fixed on the fence and transmitted to the control unit which analyses the information and generates an alarm if the activation threshold is reached.

Supplied with 12Vdc, the single management unit can be installed inside or outside the building. Thus, it manages 600m of cable distributed over 2 directions of 300 m maximum. Each 100 m of cable section is equipped with 40 sensors, i.e. 1 sensor per panel and up to 120 sensors per cable direction. During an intrusion, alarm information is transmitted from the control unit by dry contacts.

G-Fence 600

 

EASY INSTALLATION

 RELIABILITY

 and  INTEGRATED WEB SERVER

G-FENCE 3000

G-FENCE is a shock detection system for perimeter fences. G-FENCE detects fence vibrations generated by intrusion attempts by cutting, climbing or pulling out the fence. The system then transmits alarm information via the MAXIBUS UNIVERSAL Hub, with length detction 3200m persystem.

To limit civil engineering, G-FENCE works autonomously thanks to power supply from solar panels and a batteries that are integrated into each control unit. Unique on the market, the G-FENCE innovation can be used to secure a 3200 m x 4 perimeter while guaranteeing a 1 second alarm response time and a precise intrusion location to within 3 m.

Detection adjustment is very simple. A mapping software application is used to locate zoning by superimposing it over a site plan or picture. Maintenance is facilitated as the product is easy to connect.

G-Fence 3000

 

EASY INSTALLATION

RELIABILITY

EFFICIENCY

III. DUAL TECHNOLOGY Detectors

The dual-technology detectors associates a passive infrared (PIR) sensor with a high-frequency microwave sensor with Doppler effect. The passive infrared detector detects temperature variations in its detection field during an intrusion.

As for tThe Doppler detector uses a microwave transmitter and receiver antenna that , it is all about a high-frequency transmission and reception antenna which transmits a pulse and analyses the signal reflected by the environment. The frequency differences between the signal transmitted and the signal received provide information about the moving objects in the detection area.

 

Technology  points:

– Cost-effective solution

– Easy installation on any material

PIRAMID - Dual Technology Detector

The new PIRAMID detectors are a high performance intrusion volumetric detection system at the cutting edge of current technology. The reliability of the product by the combination of two technologies is provided by a passive infrared sensor (PIR) and a Doppler microwave antenna. The alarm will only be triggered if the two technologies simultaneously detect an intrusion.

PIRAMID detectors are very easy to set up. Via a secure application on smartphone or tablet, if the detector is difficult to access, the setting can be done locally, wirelessly.
The embedded CONNECT technology makes it possible to put several PIRAMID detectors in radio or wired network to centralize the alarm information on the MAXIBUS UNIVERSAL.

Intrusion Detection for Critical Area

PIRAMID detectors can be used in a wide variety of environments to protect specific assets or strategic locations: passageway, building entrance, pre-defined area.

Example: loading dock, hazardous storage area, and any other Critical area.

Microwave Detector in ATEX (Anti Explosion)

PIRAMID ATEX is compliant with the Standard ATEX 94/9 EC – EN 50014 -18. This product assures the protection of hazardous locations due to the presence of flammable gasses, combustible dusts, easily ignitable fibres/flying sparks.

Intrusion Detection for Extreme Environment

Piramid ATEX is suitable for sensitive sites classed Zone 1 and 2 for flammable gasses and Zone 21 and 22 for combustible dusts: Oil Rigs, Petrochemical Sites, Storage zones for dangerous materials.

IV. DETECTOR Fences & Outriggers

Fences and outrigger detectors are perimeter protection systems whose main function is to physically prevent intrusions. Active fences are composed of detector panels that generate an alarm when someone tries to cut through them or tear them down. Outrigger detectors transmit an alarm information when an intruder tries to climb over a fence, a gate or a wall.

The technology strengths:

– No false alarm possible

– Provides physical (anti-intrusion) and electronic (detection) protection

– Creation of active cages to protect highly secured access and small zones

FENCES ELECTRIFICATION SYSTEM

THE TECHNOLOGY STRENGTHS :

  • VERY HIGH-SECURITY PROTECTION
  • EQUIVALENT TO A DOUBLE FENCE
  • DETERRENT FUNCTION

SILUR 360 SORHEA

The SILUR system can electrify any existing fence by adding live strands. It guarantees detection and repulsion to prevent intrusion. Any attempt to climb it, cross it or cut it is analyzed and an alarm is immediately triggered. Any intrusion attempt will be repelled by the action of the electrified fence.

SI-LOCK SORHEA

SI-LOCK detects any attempt to cross or cut a fencing panel.

It prevents any attempt to dismantle it, thanks to a unique overhead 360° sensor at the centre of the panel, that can detect any movement.

SI-TOP SORHEA

SI-TOP FX and SI-TOP 360 are electrified outriggers that complete your perimeter protection.

They can be installed on top of walls or fences.